Most guys try not to talk about penis size as it is a painful topic for them. Some boys, even normal size, want to change the length of their penis. Today it can be done in different ways, even without surgeries. For example, a vacuum pump for men will help lengthen the penis. Before buying this device, you should be familiar with how to properly use the penis enlargement pump.
Is it possible to enlarge the penis with a pump
First you need to understand if a vacuum pump helps in erection and if it is realistic to enlarge the penis with a pump, as some doubt the effectiveness of this method.
Until recently, such a vacuum pump was only used to improve elevation. Indeed, when using the pump for the penis, blood flow increased several times, due to which the erection increased. Over time, boys who improved their erection with noticed that after using this device, the dimensions of the penis became larger. Therefore, you should not think about whether it is possible to enlarge the penis with a vacuum pump, as this has been proven for a long time.
Many people advise using just such a device to change the size of the penis at home.
Due to the constant stimulation of blood circulation, the epithelial tissue is constantly growing and this lengthens the penis.
it has been proven that most guys who use this device regularly have achieved good results. Just a month later, the penis enlargement pump helped to make it two and a half times thicker. Length also increases, but much more slowly than width.
How does the penis enlargement pump work
If you regularly use a vacuum pump to enlarge your penis, blood flow to the phallus tissue will increase. Thanks to this the lengthening and thickening of the penis is performed. It is no secret that within the organ there is a tissue composed of blood vessels. If blood circulation increases, then a gradual expansion of these cells begins.
The vacuum created by the device systematically increases blood flow and fills spongy tissue with it. This leads to an improvement in the strength, stretching of the skin of the penis and its enlargement.
Varieties
Most penis enlargement pumps do not differ from each other in their structure. Outwardly, they resemble an ordinary plastic balloon, on which a ruler is placed. Penis enlargement pumps are sold with a bulb to put pressure on the balloon and a special seal.
However, some models may be equipped with a drain valve, pressure gauge or a special pressure control button.
There are several types of these devices.
Manual
Many men choose to use a hand pump to enhance their masculine dignity. This model has a special integrated piston that allows you to completely remove air from the balloon. Such pumps are cheaper and that is why they are used more often than others.
Automatic
The automatic pump allows you to enlarge your penis much faster than the manual one. It is connected to an electric pump powered by batteries. A person does not need to make any effort to use this model. Just adjust the pressure and use an electric vacuum pump.
Aquarius
Not everyone uses water pumps to enlarge their penis, as these models have appeared relatively recently. In this case, water is added to the container. Such devices are more effective and have virtually no contraindications. Also, the advantages of water models include their service life.
impossible it is impossible to determine without a doubt which hydraulic pump for penis enlargement is best, as all of the above models have their differences.
Selection Features
Before magnifying penile with a vacuum pump, you need to understand how to choose the right device. When choosing, you should adhere to the following recommendations:
- the length of the penis balloon should be 3-4 cm longer than the raised penis;
- the device should be 2-3 cm wider than the circle of the penis during erection;
- beginners are advised to use a device equipped with a pear-shaped oxygen pump;
- a vacuum pump for penis enlargement should be made of reliable material with which a complete seal can be achieved.
You should also consider how much the purchased device costs. If there are no financial constraints, then you can immediately buy an automatic model.
How to make a pump yourself
If you wish, you can make a penis pump with your own hands. A household pump for men should consist of the following elements:
- Flask. The element is designed to accommodate the penis.
- Pump. A binding element used to pump oxygen.
- Tub. In most models, it is used to connect a pump to a balloon. However, sometimes you can find models without tubes. In this case, the structure is monolithic and the pump is attached directly to the balloon itself without the use of auxiliary elements.
To independently make such a device to improve power, you must follow the instructions below:
- It is recommended to use a balloon to create a balloon. First, a special hole is made in it, into which the penis will be inserted. It should be unmarked and therefore make sure it is completely flat.
- Once you are done with the first hole, you need to move on to another. It should be perpendicular to the walls. This hole is created for mounting the pipe to be connected to the pump. The width of the hole is determined based on the dimensions of the connected hose.
- A pipe is connected to the created hole. For this it is recommended to use a high density hose and thick walls. A hose made of very thin material will block the air in turns, which can negatively affect the operation of the device.
- A paper funnel should be placed at the bottom of the container, which will be used to apply the adhesive in the future. The thickness of the tube should be equal to the width of the raised penis.
- When the sealant is completely dry, you can start the pump connection. For this, you can use a small aquarium pump or a regular rubber bulb.
This device is enough to figure out if the pump is enlarging the penis. However, for better performance, it is still recommended to buy high quality vacuum pumps.
How to use the penis enlargement pump
Not every boy knows how to use a penis pump. For the correct use of a vacuum pump for men, you need an instruction that will describe the features of using this device.
Before using the penis enlargement device, I lubricate the plastic balloon with a little lubricant. In this case, I only use non-greasy lubricants so as not to accidentally damage the balloon. When the bulb is fully lubricated, the penis can be placed in it. At the same time, it must be positioned in order to fit well into the walls. After that, air begins to be pumped and this leads to the fact that blood flow begins to gradually increase.
When lengthening the penis with a pump, it is necessary to adjust the balloon with one hand and pour oxygen with the other using a pear. Also in the balloon it is necessary to completely cover the hole, which helps to create a complete tightness. After a few minutes, you may notice a strong redness of the enlarged penis.
The rash indicates that a further increase in erection may be damaging and therefore should release air into the balloon.
When the erection weakens slightly, the procedure should be repeated. The duration of the device is 20-30 minutes. This device should be used to treat impotence every 2-3 days. However, it is recommended to use the pump every day during the first week, especially before sex. Indeed, for some men it is important that the length of their penis increase immediately before sexual intercourse. When the penis is extended, a special erection ring can be used behind the pump. It is fixed to the base of the penis and does not allow the erection to disappear quickly.
Contraindications
Before enlarging your penis with a pump, you should be familiar with the main contraindications. This penis enlargement machine should not be used:
- persons with infectious urethritis and inflammation;
- men with thrombosis.
Therefore, it is recommended that you consult an andrologist so that he can perform all the necessary tests and make a conclusion about the need to enlarge the penis with a pump.
Conclusion
Many boys are wondering if it is possible to enlarge their penis with a pump. To understand this, you need to get acquainted with the principle of operation of this device and communicate with the people who have used it.